> CONTENTS

SHEEP

(You will need three white 260’s, one for each sheep. You can use more or less, depending on the size of the nativity scene.)

Step 1:

Inflate 1 white 260, leaving a 6-inch tail. Tie off.

Step 2:

Twist 9 half-inch bubbles. Lock-twist the third through the ninth bubbles together. Push the first bubble through the loop of half-inch bubbles just formed.

Step 3:

Starting from the neck, ear-twist the second and the sixth bubble. This forms the head of the sheep.

Step 4:

Twist 1 one-inch bubble, 1 two-inch bubble, 2 one-inch bubbles, and 1 two-inch bubble. Lock-twist together. This forms the front legs of the sheep.

Step 5:

Twist 1 three-inch bubble, 1 two-inch bubble, 2 one-inch bubbles, and 1 two-inch bubble. Lock-twist the 2 two-inch bubbles together.

Step 6:

Rollover-twist the back legs over the three-inch bubble to get the sheep to lie down. If you want the sheep to stand, then you can skip this step. Make the appropriate markings on the face, if desired.

Create as many sheep as you feel led to by repeating the above steps.

Previous Next